How to replace exterior light bulbs and Fog Light Bulb on Jeep Compass?

To replace exterior light bulbs, turn off the engine and pull the emergency brake, then unplug the battery's negative terminal. For front park and turn signal bulbs, turn the steering wheel, remove the fasteners of fenderwell splash shield, snap off the electrical connector, turn the bulb holder anti-clockwise and slide out. New bulb should then be installed in its holder. For fog light bulbs, undo the wheel lug nuts, lift the vehicle and remove the wheel. Once more, together with the fenderwell splash shield of the vehicle, the fasteners should be removed, and the electrical connector detached, and possibly, at the same time as the connector, the retaining screws. By unscrewing the latches, both on each side of the bracket, the bulb can be pulled out easily. The center high mounted brake light likewise involves the removal of the screws, pulling out of the electrical connection and washer hose and total removal of the light. For taillight bulbs, follow the instructions given below for replacement: For license plate light bulbs, remove lens cover, extract the bulb and replace it in the reverse method. Interior lights: For the instrument cluster LEDs it is not possible to replace individual LEDs, and for the dome/reading lights , first thing that needs to be done is to remove the lens cap gently which has to be then put back in the reverse manner.

Genuine Jeep Compass Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Fog Light Bulbs found

View related parts
Jeep Compass Bulb
Part Number: L0009145
$25.03 MSRP: $36.70
You Save: $11.67 (32%)
ADD TO CART
Product Specifications
- Other Name: Bulb 9145; Fog Lamp Bulb
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Jeep Compass | Base 4WD, Base FWD, Limited 4WD, Limited FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Jeep Compass Bulb
Part Number: L0007440
$10.89 MSRP: $15.80
You Save: $4.91 (32%)
ADD TO CART
Product Specifications
- Other Name: Bulb 7440/W21W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2024 Jeep Compass | 80th Spec. Edition AWD, 80th Spec. Edition FWD, Base 4WD, Base FWD, Latitude 4WD, Latitude AWD, Latitude FWD, Limited 4WD, Limited AWD, Limited FWD, Sport 4WD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L, 4 Cyl 2.4 L GAS, 4 Cyl 2.4L
View related parts
Jeep Compass Headlamp Bulb
Part Number: L0000H11
$33.79 MSRP: $48.35
You Save: $14.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Bulb-Headlamp; Fog Lamp Bulb, Lower Beam Bulb
- Replaced by: 68604860AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Compass | 80th Spec. Edition AWD, 80th Spec. Edition FWD, Base 4WD, Base FWD, Latitude 4WD, Latitude AWD, Latitude FWD, Limited 4WD, Limited AWD, Limited FWD, Sport 4WD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Jeep Compass Bulb
Part Number: L000PSX24W
$56.25 MSRP: $83.35
You Save: $27.10 (33%)
ADD TO CART
Product Specifications
- Other Name: Bulb PSX24W; Fog Lamp Bulb
- Replaced by: L0PSX24W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Compass | Base 4WD, Base FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Jeep Compass Bulb
Part Number: 68641304AA
$47.96 MSRP: $70.25
You Save: $22.29 (32%)
ADD TO CART
Product Specifications
- Other Name: Fog Lamp Bulb, Headlamp Bulb, Lower Beam Bulb
- Replaces: 68124430AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Compass | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Compass Fog Light Bulb

Fog Light Bulbs enables Jeep Compass vehicles to operate under difficult road conditions including foggy, rainy and snowy environments. These bulbs are installed at the lower part of the vehicle and cast a broad beam towards the road while emitting pale glow to the surroundings, thus are less tapping on the vehicle's vision. Through the course of time, Jeep Compass has made use of many types of Fog Light Bulbs, especially the Halogen and LED types. Halogen bulbs are slightly longer lasting than traditional incandescent bulbs, they get dim over their useful life span and should be replaced in pair. Halogen bulbs are also available in better luminosity and in various color temperatures up to 3000 K and LED bulbs have considerable advantages such as higher luminosity, energy efficacy and reliability, fours times longer than those incandescent bulbs.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Compass Fog Light Bulb at great affordable prices. Moreover, all genuine Jeep Compass Fog Light Bulb come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Compass Fog Light Bulb Parts Questions & Experts Answers

Headlamp Bulb
L0000H11
Q: How to replace exterior light bulbs and Fog Light Bulb on Jeep Compass?
A:
To replace exterior light bulbs, turn off the engine and pull the emergency brake, then unplug the battery's negative terminal. For front park and turn signal bulbs, turn the steering wheel, remove the fasteners of fenderwell splash shield, snap off the electrical connector, turn the bulb holder anti-clockwise and slide out. New bulb should then be installed in its holder. For fog light bulbs, undo the wheel lug nuts, lift the vehicle and remove the wheel. Once more, together with the fenderwell splash shield of the vehicle, the fasteners should be removed, and the electrical connector detached, and possibly, at the same time as the connector, the retaining screws. By unscrewing the latches, both on each side of the bracket, the bulb can be pulled out easily. The center high mounted brake light likewise involves the removal of the screws, pulling out of the electrical connection and washer hose and total removal of the light. For taillight bulbs, follow the instructions given below for replacement: For license plate light bulbs, remove lens cover, extract the bulb and replace it in the reverse method. Interior lights: For the instrument cluster LEDs it is not possible to replace individual LEDs, and for the dome/reading lights , first thing that needs to be done is to remove the lens cap gently which has to be then put back in the reverse manner.