My Garage
My Account
Cart
Genuine Jeep Patriot Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
15 Fuel Pumps found
Jeep Patriot Fuel Tank Sending Unit
Part Number: 5183201AB$361.90 MSRP: $554.00You Save: $192.10 (35%)
Jeep Patriot Fuel Pump Module/Level Unit
Part Number: 5183202AC$251.99 MSRP: $377.00You Save: $125.01 (34%)
Jeep Patriot Fuel Pump/Level Unit Module
Part Number: 5183202AB$251.99 MSRP: $377.00You Save: $125.01 (34%)
Jeep Patriot Fuel Pump Module/Level Unit
Part Number: 5183201AD$361.90 MSRP: $554.00You Save: $192.10 (35%)
Jeep Patriot Fuel Pump Module/Level Unit
Part Number: RL183202AB$246.28 MSRP: $377.00You Save: $130.72 (35%)
Jeep Patriot Fuel Pump Module/Level Unit
Part Number: 5183201AC$361.90 MSRP: $554.00You Save: $192.10 (35%)
Jeep Patriot Fuel Pump Module Assembly-And Level Sensor Module
Part Number: RL183201AC$361.90 MSRP: $554.00You Save: $192.10 (35%)
Jeep Patriot Auxiliary Fuel Pump Module Kit
Part Number: 68003359AB$148.90 MSRP: $221.00You Save: $72.10 (33%)
Jeep Patriot Fuel Pump
This component in Jeep Patriot vehicles is responsible for the dispensing of fuel from the fuel tank to the engine with a view of achieving the most efficient combustion. Electric fuel pumps are used for the fuel injection systems in Jeep Patriots often located inside the fuel tank along with sending unit. However, carbureted engines may use mechanical fuel pumps which are fitted outside the engine and works at a relatively low pressure. For years now Jeep Patriot models have most commonly used electric pumps because they are more efficient and deliver higher pressures which are paramount especially in today's fuel injection systems. As the name suggests, these electric pumps which may be monitored by electronic control units help to boost safety and performance by effectively regulating fuel delivery. The use of mechanical pumps has been replaced by the new electric pumps in the Jeep Patriot cars due to its technological developments that includes enhanced cooling and has no drawbacks like causing fires as used in the previous models of Jeep Patriot.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Fuel Pump at great affordable prices. Moreover, all genuine Jeep Patriot Fuel Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Fuel Pump Parts Questions & Experts Answers
- Q:How to Remove and Replace the Primary Fuel Pump Module on Jeep Patriots?A:For AWD models, the fuel tank configuration consists of a primary and secondary fuel pump module, each equipped with a sending unit. The primary module includes an electric fuel pump, venturi jet pump (AWD models only), fuel pump reservoir, strainer, fuel pressure regulator, fuel sending unit, and fuel filter. The secondary module (AWD only) contains the fuel pick-up line connection and fuel level sending unit. The only serviceable component is the fuel level sending unit on the primary module; any issues with other components necessitate replacing the entire module. To begin the removal process, relieve the fuel system pressure and disconnect the battery's negative terminal. Then, disconnect the electrical connector and fuel delivery line quick-connect fitting from the primary module. Before removing the primary fuel pump module, cap the module fuel line fitting and create alignment marks on the assembly and fuel tank for correct realignment during reinstallation. Use a special service tool or a brass drift to loosen the lock ring securing the fuel pump module and lift the assembly carefully from the fuel tank, ensuring the float arm of the fuel level sending unit and fuel pump inlet strainer remain undamaged. Be prepared for fuel spillage from the reservoir when removing the module. Inspect the pump inlet strainer for cleanliness and any damage, cleaning it if necessary. Verify that the rubber O-ring groove is clean, and replace the O-ring if damaged. On AWD models, reconnect the internal fuel line to the bottom of the module, then carefully reinstall the module into the tank with proper positioning and the locating lug seated. Finally, align the marks and securely tighten the fuel pump module lock ring during installation. If the special tool is unavailable, alternative locking methods can be used.
