My Garage
My Account
Cart
Genuine Jeep Patriot Lateral Link
Lateral Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Lateral Links found
Jeep Patriot Lateral Link
The Lateral Link plays a critical role of ensuring that rear axle and the wheels of Jeep Patriot vehicles are well aligned and stable. Through centring of the wheel hub the Lateral Link assists the vehicle in successfully controlling and coordinating the lateral movements. This component is very essential for the management and safety of the Jeep Patriot because they are utilized in supporting the rear axle and sustaining any side to side movement. Over the years, Jeep Patriot has always applied the Lateral Link in achieving these goals, but as to whether the given jeep apply a certain variation or style of the Lateral Link in different models or years are not stated. The primary function remains the same: in order to sustain the rear axle and wheels in order to afford an even and stable drive without jeopardizing on the fun of driving.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Lateral Link at great affordable prices. Moreover, all genuine Jeep Patriot Lateral Link come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Lateral Link Parts Questions & Experts Answers
- Q: How to Effectively Remove and Install the Rear Lateral Link on Jeep Patriot?A:Loosen the wheel lug nuts. Raise the vehicle and support it securely on jackstands. Remove the wheels. Remove the nut and bolt that secures the link to the Trailing Arm. Mark the position of the inner pivot bolt adjuster cam to the crossmember using a marker or crayon. Do this on the other side of the crossmember, too. Do not scratch the finish of the crossmember to make your mark. Hold the bolt in place and remove the nut. Remove the bolt and detach the toe link from the crossmember. Install the inner pivot and adjuster cams, lining up the marks you made earlier. Raise the rear suspension with a floor jack placed under the outer end of the lower Control Arm to simulate normal ride height, then tighten the fasteners to the torque. Install the wheels and lug nuts, lower the vehicle and tighten the lug nuts to the torque. Have the rear wheel alignment checked and, if necessary, adjusted.
