Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Chrysler R3602014AA Head&VALV-Cylinder

2014 Chrysler R3602014AA

Customer Questions & Expert Answers (16)
R3602014AA Mopar Head&VALV-Cylinder Illustration 1 of 1
R3602014AA Mopar Head&VALV-Cylinder Illustration 1 of 1
  • Part Description
    Head&VALV-Cylinder
  • Manufacturer
    Mopar
Make sure this part fits
$734.65 MSRP: $1100.00
You Save: $365.35 (34%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • R3602014AA Head&VALV-Cylinder is Ref No. 1 in the diagram below

    2014 Ram ProMaster 3500 Head&VALV-Cylinder Diagram for R3602014AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberR3602014AA
    Part DescriptionHead&VALV-Cylinder
    Item Dimensions20.8 x 12.6 x 10.6 inches
    Item Weight34.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKUR3602014AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2014 Chrysler 2006 Cyl 3.6LLimited Convertible, Limited Sedan, LX Sedan, S Convertible, Touring Convertible, Touring Sedan
    2014 Chrysler 3006 Cyl 3.6LBase AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C RWD, S AWD, S Luxury Series RWD, S RWD
    2014 Chrysler Town & Country6 Cyl 3.6LLimited, S, Touring, Touring L

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if R3602014AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What should be done with the number one piston and the Cylinder Head before proceeding for the 2014 Chrysler 200? Posted by Customer
    A:
    Position the number one piston at Top Dead Center and disconnect the negative battery cable from the remote ground terminal.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the mating surfaces of the cylinder head and block be prepared for the 2014 Dodge Avenger? Posted by Customer
    A:
    The mating surfaces of the cylinder head and block must be perfectly clean when the head is installed. Use a gasket scraper to remove all traces of carbon and old gasket material, then clean the mating surfaces with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket and Cylinder Head be positioned for the 2014 Dodge Challenger? Posted by Customer
    A:
    Position the new gasket over the dowel pins, carefully place the cylinder head on the engine block, and install new cylinder head bolts, tightening them without applying additional oil to the threads.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the Cylinder Head for the 2014 Dodge Avenger? Posted by Customer
    A:
    Follow the reverse order of removal for the remainder of the installation, concluding with an oil and filter change and refilling the cooling system.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for lifting the Cylinder Heads off the engine for the 2014 Dodge Challenger? Posted by Customer
    A:
    Lift the heads off the engine carefully, using a block of wood and a hammer if necessary, and store them on blocks of wood to protect the gasket sealing surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the recommended method for cleaning rocker arm parts and the Cylinder Head for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    The rocker arm parts should be cleaned with solvent and dried thoroughly, ensuring they are not mixed up, while compressed air can help clean out the oil passages.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket be positioned on the Cylinder Head for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    Position the new gasket over the dowel pins in the block, ensuring any markings are facing the correct direction.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the reassembly process for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    Begin by installing the spring seats or valve rotators, if equipped, before the valve seals.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to prepare for the installation of the Cylinder Heads for the 2014 Jeep Grand Cherokee? Posted by Customer
    A:
    Ensure the mating surfaces of the cylinder heads and block are perfectly clean, using gasket removal solvents and a scraper as needed.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected on the Cylinder Head for the 2014 Jeep Grand Cherokee? Posted by Customer
    A:
    Inspect the cylinder head for warpage and check the head gasket, intake, and exhaust manifold surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for placing the Cylinder Head on the engine block for the 2014 Jeep Grand Cherokee? Posted by Customer
    A:
    Carefully place the cylinder head on the engine block and install new cylinder head bolts, tightening them in the recommended sequence without using a torque wrench for steps requiring additional rotation.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in preparing for the installation of the Cylinder Heads for the 2014 Jeep Wrangler? Posted by Customer
    A:
    Ensure the mating surfaces of each cylinder head and the engine block are clean, using a gasket scraper and cleaning agents to remove any residue.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the coolant temperature sending unit and spark plug wires for the Cylinder Head of the 2014 Jeep Wrangler? Posted by Customer
    A:
    Label and disconnect the wire from the coolant temperature sending unit on the cylinder head, then label the spark plug wires and remove the spark plugs.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the Cylinder Head be reinstalled for the 2014 Ram 1500? Posted by Customer
    A:
    For installation, position the new head gasket over the dowels in the block, place the cylinder head over it without disturbing the gasket, and apply engine oil to the head bolt threads and underneath the bolt heads. Install the bolts in their original locations and tighten them to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the Cylinder Head bolts be handled before removal for the 2014 Ram 1500? Posted by Customer
    A:
    Loosening the cylinder head bolts in reverse order to the tightening sequence is advised to prevent warping or cracking of the head.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part R3602014AA, the Right Choice

To ensure reliability, purchase Mopar part # R3602014AA Head&VALV-Cylinder. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 200, 300, and Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as R3602014AA Head&VALV-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly