Make sure this part fits

Mopar 4667088AG Cylinder Head

2004-2005 Mopar 4667088AG

Customer Questions & Expert Answers (10)
4667088AG Mopar Cylinder Head Illustration 1 of 1
  • Part Description
    Head Cylinder
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4667088AG
    Part DescriptionHead Cylinder
    Item Dimensions27.7 x 11.4 x 8.8 inches
    Item Weight48.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4667088AG
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2005 Chrysler PT Cruiser4 Cyl 2.4LBase, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible
    2004-2005 Chrysler Sebring4 Cyl 2.4LBase Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
    2004-2005 Chrysler Town & CountryEL, LX FWD
    2004-2005 Dodge Caravan4 Cyl 2.4LC/V, SE
    2004-2005 Dodge Grand CaravanC/V, EL, SE, Sport FWD
    2004-2005 Dodge Neon4 Cyl 2.4LSRT-4
    2004-2005 Dodge Stratus4 Cyl 2.4LES, SE, SXT
    2004-2005 Jeep Liberty4 Cyl 2.4LLimited Edition 4WD, Sport 2WD, Sport 4WD
    2004 Jeep Wrangler4 Cyl 2.4LSE
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4667088AG fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What should be done with threaded fasteners and holes in the Cylinder Head for the 2005 Chrysler PT Cruiser? Posted by Customer
    A:
    Clean all threaded fasteners and holes.
    Posted by MoparPartsGiant Specialist
    Q:
    How should old gasket material be removed from the Cylinder Head of the 2005 Chrysler Town & Country? Posted by Customer
    A:
    Remove all traces of old gasket material from the block and head, using special gasket removal solvents if available, while being cautious not to gouge the aluminum sealing surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket be positioned on the Cylinder Head for the 2005 Dodge Caravan? Posted by Customer
    A:
    Position the new gasket over the dowel pins in the engine block, ensuring any markings are facing up and forward.
    Posted by MoparPartsGiant Specialist
    Q:
    How can corrosion and thread sealant be removed from threaded holes in the Cylinder Head of the 2005 Dodge Grand Caravan? Posted by Customer
    A:
    An appropriate size tap should be used in each threaded hole to remove corrosion and thread sealant, and compressed air should be employed to clear debris while wearing eye protection.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the first valve be installed for the 2004 Dodge Grand Caravan? Posted by Customer
    A:
    Starting at one end of the head, lubricate and install the first valve, applying moly-base grease or clean engine oil to the valve stem.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before loosening the Cylinder Head bolts for the 2005 Dodge Grand Caravan? Posted by Customer
    A:
    Allow the engine to cool completely.
    Posted by MoparPartsGiant Specialist
    Q:
    Are there any differences in head gaskets for the 2004 Jeep Wrangler related to the Cylinder Head? Posted by Customer
    A:
    Yes, 1987 and 1988 four-cylinder engines use different head gaskets than 1989 and later models, which are not interchangeable and require different tightening torques.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the exhaust pipe and Cylinder Head for the 2004 Jeep Liberty? Posted by Customer
    A:
    Disconnect the exhaust pipe from the exhaust manifold, and then lower the vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the wires and vacuum hoses connected to the Cylinder Heads for the 2004 Jeep Wrangler? Posted by Customer
    A:
    Disconnect all wires and vacuum hoses from the cylinder heads, labeling them for easier reinstallation.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 4667088AG, the Right Choice

To ensure reliability, purchase Mopar part # 4667088AG Cylinder Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler PT Cruiser, Sebring, and Town & Country models. It fits Dodge Caravan, Grand Caravan, Neon. It also fits Jeep Liberty and Wrangler.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 4667088AG Cylinder Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly