Make sure this part fits

Mopar 68141353AB Engine Cylinder Head

2012 Mopar 68141353AB

Customer Questions & Expert Answers (9)
68141353AB Mopar Engine Cylinder Head Illustration 1 of 1
  • Part Description
    Head-Engine Cylinder
  • Replaced By
    68141353AC
  • Manufacturer
    Mopar
Make sure this part fits
$981.05 MSRP: $1190.00
You Save: $208.95 (18%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68141353AB
    Part DescriptionHead-Engine Cylinder
    Item Dimensions9.7 x 13.2 x 20.8 inches
    Item Weight38.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68141353AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2012 Chrysler Town & Country6 Cyl 3.6LLimited, Touring, Touring L
    2012 Dodge Challenger6 Cyl 3.6LR/T, SE, SRT8
    2012 Dodge Charger6 Cyl 3.6LPolice RWD, SE RWD, SXT AWD, SXT RWD, V6 AWD
    2012 Dodge Durango6 Cyl 3.6LCitadel AWD, Citadel RWD, Crew AWD, Crew RWD, Heat AWD, Heat RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD
    2012 Dodge Grand Caravan6 Cyl 3.6LCrew, R/T, SE, SXT
    2012 Jeep Grand Cherokee6 Cyl 3.6LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2012 Ram C/V6 Cyl 3.6LBase
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68141353AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How do you remove the exhaust manifold(s) and Cylinder Head for the 2012 Dodge Challenger? Posted by Customer
    A:
    Remove the exhaust manifold(s) from the cylinder head(s). Note that on 2015 and later Challenger models with 5.7L engines and all models with the 6.4L engine, the exhaust manifolds can only be removed after the cylinder head has been detached.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the Cylinder Head before installation for the 2012 Dodge Challenger? Posted by Customer
    A:
    Inspect and service the cylinder head as needed.
    Posted by MoparPartsGiant Specialist
    Q:
    How should valve components, including the Cylinder Head, be cleaned for the 2012 Dodge Grand Caravan? Posted by Customer
    A:
    All valve springs, spring seats, keepers, and retainers should be cleaned with solvent and dried thoroughly, working on one valve at a time to avoid mixing parts.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done for the remaining valves for the 2012 Dodge Grand Caravan? Posted by Customer
    A:
    Repeat the procedure for the remaining valves, ensuring that components are returned to their original locations without mixing them up.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in preparing for installation of the Cylinder Head for the 2012 Dodge Grand Caravan? Posted by Customer
    A:
    Ensure the mating surfaces of each cylinder head and block are perfectly clean, using a gasket scraper to remove any carbon and old gasket material.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be done for the rear Cylinder Head for the 2012 Dodge Grand Caravan? Posted by Customer
    A:
    Detach the heater hoses and brackets from the transaxle end of the head, remove the air cleaner housing from the engine compartment, and take out the alternator and bracket from the cylinder head.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2012 Jeep Grand Cherokee be positioned for this procedure involving the Cylinder Head? Posted by Customer
    A:
    Raise the front of the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for placing the Cylinder Head on the engine block for the 2012 Jeep Grand Cherokee? Posted by Customer
    A:
    Carefully place the cylinder head on the engine block and install new cylinder head bolts, tightening them in the recommended sequence without using a torque wrench for steps requiring additional rotation.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 68141353AB, the Right Choice

To ensure reliability, purchase Mopar part # 68141353AB Engine Cylinder Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler Town & Country models. It fits Dodge Charger, Durango, Grand Caravan. It also fits Jeep Grand Cherokee. This also fits Ram C/V.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 68141353AB Engine Cylinder Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly