How to check Fuel Pressure Regulator and Fuel Pump on Chrysler Cirrus?

These vehicles use a 'returnless' fuel system in which the fuel pressure regulator is mounted within the fuel pump assembly which is installed in the fuel tank. Fuel pump operates when the engine is cranking or running only if the PCM receives ignition reference pulse from electronic ignition system; otherwise, the pump turns off after about second. To check fuel pressure a fuel pressure gauge and adapter set is necessary given the fact that V6 engines do not come equipped with a fuel pressure test port, thus, an adapter has to be fitted in between the fuel supply line and the fuel rail. If you find that fuel delivery seems to be low, you should start by checking all fuel hoses and hoses for signs of leakage, And if you turn the ignition to the 'On' position, you should hear a 'whirring' noise at the fuel filler neck. If no sound is produced, one ought to examine the fuses affecting the pump, the pump itself, the relay and such circuits. Complete the fuel pressure relief procedure, connect the gauge to the test port on 4-cyl, engines or use the special adapter on 6-cyl. intake manifolds they are fast and easy. Lower pressure should be noted when the engine is started and key turn is off, kinks or restrictions in the fuel lines should be checked, fuel pressure regulator should be replaced if required and the fuel filter also. If no fuel pressure is reading, check the fuel pump and the relays. You can know this because to check for the leaks, one has to add pressure in the system and when one puts off the fuel injectors, if it loses pressure, then there is a leakage at the set injectors. If the pressure does not change, fuel pressure regulator could have to be replaced. Following the test, release fuel pressure and reconnection all the fittings. If the fuel pump does not operate then inspect the fuel pump relay to ensure that it gets the proper voltage of the battery. ASD and fuel pump relays will have to be checked to see if they are functioning correctly and this can be done by using a voltmeter to check for the presence of battery voltage on several terminals and using an ohm meter to test for resistance and continuity. If there are areas that went wrong, make the necessary swap of the parts that did not work as planned.

How to remove and replace the fuel pump module from the fuel tank on Chrysler PT Cruiser?

Relieve the system fuel pressure, then remove the fuel tank. Disconnect the fuel supply hose and the electrical connector from the fuel pump module by squeezing the two locking tabs together to detach the hose and pulling out the locking tab to unlock the electrical connector. Before removing the fuel pump module, make an alignment mark on top of the fuel tank, right underneath the fuel outlet pipe to ensure correct realignment during installation. Unscrew the fuel pump module locknut using large water pump pliers or a hammer and brass drift, taking care not to use a steel drift to avoid sparks. Carefully withdraw the fuel pump module from the fuel tank, ensuring not to bend or damage the float level arm or the fuel pump filter. If replacing the fuel pump or the fuel level sending unit, separate the two components. While the pump is removed, inspect the pump filter for clogs or damage; if dirty, wash it in clean solvent, and if still clogged, replace it. Installation is the reverse of removal, ensuring the fuel pump module locknut is tightened securely.

Genuine Chrysler Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

102 Fuel Pumps found

View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68166589AC
$479.60 MSRP: $727.00
You Save: $247.40 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit; Fuel Pump
- Replaced by: 68166589AE
Fits the following Chrysler Models:
- 200 | 2015-2016 | C FWD, Limited, LX, S FWD | 4 Cyl 2.4L
View related parts
Chrysler Fuel Pump Module Assembly
Part Number: 68187986AB
$270.95 MSRP: $405.00
You Save: $134.05 (34%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68187986AD
Fits the following Chrysler Models:
- 200 | 2015-2017 | C FWD, Limited, LX, S FWD | 4 Cyl 2.4L
View related parts
Chrysler Fuel Pump Control Module
Part Number: 68434538AA
$111.04 MSRP: $165.00
You Save: $53.96 (33%)
ADD TO CART
Product Specifications
- Other Name: Module-Fuel Pump Control; Control Module, Fuel Pump Controller
Fits the following Chrysler Models:
- Pacifica | 2019-2024 | Hybrid FWD, Hybrid Limited FWD, Hybrid Touring FWD, Hybrid Touring L FWD, Hybrid Touring Plus FWD, L FWD, Limited FWD, LX FWD, Touring FWD, Touring L AWD, Touring L FWD, Touring L Plus FWD, Touring Plus FWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6L
- Voyager | 2020-2024 | L FWD, LX FWD, LXI FWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
View related parts
Chrysler Fuel Pump/Level Unit Module
Part Number: 68494735AA
$233.04 MSRP: $348.00
You Save: $114.96 (34%)
ADD TO CART
Product Specifications
- Other Name: Module-Fuel Pump/Level Unit; Auxiliary Pump, Fuel Gauge Sending Unit, Fuel Pump
- Replaced by: 68494735AB
Fits the following Chrysler Models:
- 300 | 2020 | C RWD, Limited AWD, Limited RWD, S AWD, S RWD, Touring AWD, Touring RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump/Level Unit Module
Part Number: 68567295AA
$387.20 MSRP: $592.00
You Save: $204.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Module-Fuel Pump/Level Unit; Fuel Pump, Fuel Pump Assembly
- Replaced by: 68567295AB
- Replaces: 68319970AA, 68319970AB
Fits the following Chrysler Models:
- Pacifica | 2021-2025 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Voyager | 2021-2024 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Fuel Pump Complete Kit
Part Number: 68367534AB
$320.01 MSRP: $484.00
You Save: $163.99 (34%)
ADD TO CART
Product Specifications
- Other Name: Module-Fuel Pump/Level Unit; Fuel Pump
- Replaced by: 68367534AC
Fits the following Chrysler Models:
- 300 | 2019 | C RWD, Limited AWD, Limited RWD, S AWD, S RWD, Touring AWD, Touring RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68159764AA
$312.20 MSRP: $467.00
You Save: $154.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring
- Replaced by: 68159764AD
Fits the following Chrysler Models:
- 300 | 2011-2015 | Base AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C Platinum AWD, C Platinum RWD, C RWD, Limited AWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, S V6 AWD, S V6 RWD, S V8 AWD, S V8 RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68102700AA
$403.70 MSRP: $612.00
You Save: $208.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring
- Replaced by: 68102700AE
Fits the following Chrysler Models:
- 300 | 2011-2014 | Base AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, Limited AWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, S V6 AWD, S V6 RWD, S V8 AWD, S V8 RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump Complete Kit
Part Number: 68231311AA
$311.09 MSRP: $465.00
You Save: $153.91 (34%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68231311AD
Fits the following Chrysler Models:
- 200 | 2015-2017 | C AWD, S AWD | 6 Cyl 3.6L
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68217192AB
$463.10 MSRP: $702.00
You Save: $238.90 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68656921AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C AWD, S AWD | 6 Cyl 3.6L
View related parts
Chrysler Fuel Pump/Level Unit Module
Part Number: 68494734AB
$387.20 MSRP: $587.00
You Save: $199.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Module-Fuel Pump/Level Unit; Fuel Pump
- Replaced by: 68643777AB
Fits the following Chrysler Models:
- 300 | 2020 | C RWD, Limited AWD, Limited RWD, S AWD, S RWD, Touring AWD, Touring RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler MODULE-PICKUP / LEVEL UNIT
Part Number: 68494735AB
$233.04 MSRP: $348.00
You Save: $114.96 (34%)
ADD TO CART
Product Specifications
- Other Name: Auxiliary Pump, Fuel Gauge Sending Unit, Fuel Pump
- Replaces: 68494735AA
Fits the following Chrysler Models:
- 300 | 2021-2023 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68217187AB
$649.80 MSRP: $950.00
You Save: $300.20 (32%)
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68656897AA
Fits the following Chrysler Models:
- 200 | 2015-2016 | C FWD, Limited, LX, S FWD | 6 Cyl 3.6L
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 5136022AH
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring
- Replaced by: 5136022AM
Fits the following Chrysler Models:
- 300 | 2012-2014 | Base AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, Limited AWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, S V6 AWD, S V6 RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump/Level Unit Module
Part Number: 5136022AF
$436.62 MSRP: $639.00
You Save: $202.38 (32%)
Product Specifications
- Other Name: Module-Fuel Pump/Level Unit
- Replaced by: 5136022AM
Fits the following Chrysler Models:
- 300 | 2008-2009 | C AWD, C RWD, Limited AWD, Limited RWD, LX RWD, Touring AWD, Touring RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump Complete Kit-Module Assembly Left
Part Number: 68102700AC
$418.38 MSRP: $612.00
You Save: $193.62 (32%)
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring; Fuel Pump
- Position: Driver Side
- Replaced by: 68102700AE
Fits the following Chrysler Models:
- 300 | 2015-2016 | C AWD, C Platinum AWD, C Platinum RWD, C RWD, Limited AWD, Limited RWD, S AWD, S RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68367539AA
$372.78 MSRP: $548.00
You Save: $175.22 (32%)
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring; Fuel Pump
Fits the following Chrysler Models:
- 300 | 2017-2019 | C AWD, C Platinum AWD, C Platinum RWD, C RWD, Limited AWD, Limited RWD, S AWD, S RWD, Touring AWD, Touring RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Chrysler Fuel Pump Module/Level Unit
Part Number: 68103913AB
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring
- Replaced by: 68103913AF
Fits the following Chrysler Models:
- 300 | 2012-2014 | C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, C SRT8 RWD, S AWD, S Luxury Series RWD, S RWD, SRT Core RWD, SRT Premium RWD | 8 Cyl 6.4L
View related parts
Chrysler Fuel Pump/Level Unit Module Kit
Part Number: 68367540AA
$397.86 MSRP: $587.00
You Save: $189.14 (33%)
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring; Fuel Pump
- Replaced by: 68367540AB
Fits the following Chrysler Models:
- 300 | 2017-2020 | C Platinum RWD, C RWD, Limited RWD, S RWD
View related parts
Chrysler Fuel Pump/Level Unit Module
Part Number: 68643777AB
$401.28 MSRP: $587.00
You Save: $185.72 (32%)
Product Specifications
- Other Name: MODULE-FUEL PUMP/LEVEL UNIT; Fuel Pump
- Replaces: 68643777AA, 68494734AA, 68494734AB, 68494734AC
Fits the following Chrysler Models:
- 300 | 2021-2023 | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 6 |Next >

1-20 of 102 Results

Chrysler Fuel Pump

Our website has a huge selection of Chrysler Fuel Pumps at the optimal prices in the industry. If you need any genuine Chrysler Fuel Pumps, we ship them to your door step as we offer a fast delivery service. In addition, all OEM parts are backed by the manufacturer's warranty.

Chrysler Fuel Pump Parts Questions & Experts Answers

Fuel Pump Module Package And Level Unit
R4778198
Q: How to check Fuel Pressure Regulator and Fuel Pump on Chrysler Cirrus?
A:
These vehicles use a 'returnless' fuel system in which the fuel pressure regulator is mounted within the fuel pump assembly which is installed in the fuel tank. Fuel pump operates when the engine is cranking or running only if the PCM receives ignition reference pulse from electronic ignition system; otherwise, the pump turns off after about second. To check fuel pressure a fuel pressure gauge and adapter set is necessary given the fact that V6 engines do not come equipped with a fuel pressure test port, thus, an adapter has to be fitted in between the fuel supply line and the fuel rail. If you find that fuel delivery seems to be low, you should start by checking all fuel hoses and hoses for signs of leakage, And if you turn the ignition to the 'On' position, you should hear a 'whirring' noise at the fuel filler neck. If no sound is produced, one ought to examine the fuses affecting the pump, the pump itself, the relay and such circuits. Complete the fuel pressure relief procedure, connect the gauge to the test port on 4-cyl, engines or use the special adapter on 6-cyl. intake manifolds they are fast and easy. Lower pressure should be noted when the engine is started and key turn is off, kinks or restrictions in the fuel lines should be checked, fuel pressure regulator should be replaced if required and the fuel filter also. If no fuel pressure is reading, check the fuel pump and the relays. You can know this because to check for the leaks, one has to add pressure in the system and when one puts off the fuel injectors, if it loses pressure, then there is a leakage at the set injectors. If the pressure does not change, fuel pressure regulator could have to be replaced. Following the test, release fuel pressure and reconnection all the fittings. If the fuel pump does not operate then inspect the fuel pump relay to ensure that it gets the proper voltage of the battery. ASD and fuel pump relays will have to be checked to see if they are functioning correctly and this can be done by using a voltmeter to check for the presence of battery voltage on several terminals and using an ohm meter to test for resistance and continuity. If there are areas that went wrong, make the necessary swap of the parts that did not work as planned.
Fuel Pump Module/Level Unit
5161377AB
Q: How to remove and replace the fuel pump module from the fuel tank on Chrysler PT Cruiser?
A:
Relieve the system fuel pressure, then remove the fuel tank. Disconnect the fuel supply hose and the electrical connector from the fuel pump module by squeezing the two locking tabs together to detach the hose and pulling out the locking tab to unlock the electrical connector. Before removing the fuel pump module, make an alignment mark on top of the fuel tank, right underneath the fuel outlet pipe to ensure correct realignment during installation. Unscrew the fuel pump module locknut using large water pump pliers or a hammer and brass drift, taking care not to use a steel drift to avoid sparks. Carefully withdraw the fuel pump module from the fuel tank, ensuring not to bend or damage the float level arm or the fuel pump filter. If replacing the fuel pump or the fuel level sending unit, separate the two components. While the pump is removed, inspect the pump filter for clogs or damage; if dirty, wash it in clean solvent, and if still clogged, replace it. Installation is the reverse of removal, ensuring the fuel pump module locknut is tightened securely.