It is anchored at the tailgate, and the motor is in the local area of this part. First, you should detach the wiper blade as well as the arm just like a windscreen wiper blade arm. Next, remove the driveshaft nut and the spacers too would be required to be removed. Move to the removal of the tail gate trim panel; this trim panel is fixed by the use of small screws that are plastic; use your fingers to wedge between the panel and the body frame of the tailgate then pull the panel vigorously. Remove motor electrical connection by pulling the connector plug. Remove the wiper motor mounting bolts by unscrewing them and take off the motor. It is recommended to refit a new or regenerated wiper motor if the motor is defective; otherwise, the dismantling of the motor is required. To refit reverse the removal process, make sure push the motor using the wiper operating switch not by the ignition key, after that fit the wiper arm and blade as per the diagram provided.