Make sure this part fits

Mopar RL141353AA Head

2013 Mopar RL141353AA

Customer Questions & Expert Answers (2)
RL141353AA Mopar Head Product Photo 1 of 4
  • Part Description
    Head - Engine Cylinder
  • Replaced By
    68141353AC
  • Manufacturer
    Mopar
Make sure this part fits
$884.25 MSRP: $1073.00
You Save: $188.75 (18%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part NumberRL141353AA
    Part DescriptionHead; Head - Engine Cylinder
    Item Dimensions9.6 x 12.6 x 20.6 inches
    Item Weight36.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKURL141353AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013 Chrysler 3006 Cyl 3.6LBase AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, S AWD, S RWD
    2013 Dodge Challenger6 Cyl 3.6LR/T, SE, SRT8, SRT8 Core
    2013 Dodge Charger6 Cyl 3.6LPolice RWD, SE RWD, SXT AWD, SXT RWD, V6 AWD
    2013 Dodge Durango6 Cyl 3.6LCitadel AWD, Citadel RWD, Crew AWD, Crew RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD
    2013 Jeep Grand Cherokee6 Cyl 3.6LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2013 Jeep Wrangler6 Cyl 3.6LRubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara 4WD, Unlimited Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck?
    A:
    You can Select Your Vehicle to check if RL141353AA fits your vehicle.
    Posted and answered by Mopar Parts Specialist Reggie
    Q:
    How to remove and reinstall the components of the engine, including the Cylinder Head in 3.6L V6 engine on Dodge Challenger? Posted by Lloyd O.
    A:
    To remove the components first you have to give the negative terminal of the battery a clean disconnect and on 2015 and later models you must disconnect the Intelligent Battery Sensor connector first. Lift the front of the vehicle with jackstands and then lower it, remove the engine oil and the coolant from the vehicle. Take off the drivebelt, air filter housing and resonator and disconnect all wires and vacuum hoses from intake manifolds and cylinder heads and label them for reuse. Continue with the deletion of intake manifolds, ignition coils, spark plugs, catalytic converter(s) and valve cover, crankshaft balancer, and oil pan. If working on the left cylinder head either unbolt the air conditioning compressor from the engine while still connected to the refrigerant lines, disconnect the main engine harness connectors and remove the upper intake support bracket. For the right cylinder head remove the following components: power-steering pump, heater core tube fasteners, battery, and battery-tray, and oil dipstick tube fastener. Take off the timing chain cover, turn the crankshaft clockwise to have the number one piston at the TDC of the exhaust stroke and make sure there are correct position of the cam phaser arrows. Take out the timing chain, oil control valves, timing chain tensioner, chain guides and camshafts as well as the rocker arms together with the lash adjusters bearing in mind that; rocker arms and lash adjusters should always be arranged in the correct sequence. Relax the cylinder head bolts in reverse sequence as a means of removal and lift the cylinder head off the block with use of a hammer and wood block without scratching the surfaces. Cylinder head: check and test as required. For installation make sure that the surfaces of the cylinder head and the engine block are clean, use a gasket scraper and brake cleaner. They should ensure that some sort of coverage is placed over the lifter valley just to remove most debris and to inspect the mating surfaces for damage. Align the new gasket with the dowel pins and put the cylinder head on the engine block; use new cylinder head bolts contracting the head to the block without applying oil on the threads beforehand. As previously stated, uninstall in reverse sequence, re-install the remaining components, replace engine oil and filter, fill the cooling system, start the engine and look for leaks and efficient performance.
    You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Joel / Jun 05, 2025

Genuine Mopar Part RL141353AA, the Right Choice

To ensure reliability, purchase Mopar part # RL141353AA Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Challenger, Charger, Durango. It also fits Jeep Grand Cherokee and Wrangler.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as RL141353AA Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.