How to remove and install the crankshaft pulley in 3.6L V6 engine on Chrysler Sebring?

To remove the crankshaft pulley, first disconnect the negative battery cable from the remote ground terminal or battery. Loosen the lug nuts on the right front wheel, raise the vehicle, and support it securely on jackstands before removing the right front wheel. Next, remove the drivebelt. The crankshaft pulley bolt is incredibly tight; using a breaker bar, socket, and special tool #10198 or equivalent, hold the balancer to prevent it from turning while loosening and removing the bolt. Pull the crankshaft pulley off the crankshaft without needing a puller. For installation, apply clean engine oil or multi-purpose grease to the seal contact surface of the balancer hub to prevent damage to the seal lip and oil leakage. Install the crankshaft pulley, aligning the keyway on the crankshaft with the slot in the pulley hub, and install the bolt, tightening it by hand. Prevent the engine from rotating and then tighten the bolt to the specified torque. The remainder of the installation follows the reverse order of removal.

Genuine Chrysler Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

57 Crankshaft Pulleys found

View related parts
Chrysler Crankshaft Damper
Part Number: 4666099AB
$304.56 MSRP: $455.00
You Save: $150.44 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | Limited, LX, Touring, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Crankshaft Damper
Part Number: 5038473AA
$320.01 MSRP: $484.00
You Save: $163.99 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
Fits the following Chrysler Models:
- 300 | 2023, 2012-2019 | C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C Platinum RWD, C RWD, C SRT8 RWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, SRT Core RWD, SRT Premium RWD | 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Chrysler Crankshaft Damper
Part Number: 2312425000
$258.68 MSRP: $391.00
You Save: $132.32 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
Fits the following Chrysler Models:
- 200 | 2011-2012 | Limited Sedan, LX Sedan, Touring Convertible, Touring Sedan
- Sebring | 2007-2010 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Crankshaft Damper
Part Number: 53022083AA
$381.70 MSRP: $583.00
You Save: $201.30 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
Fits the following Chrysler Models:
- Aspen | 2009 | Limited 2WD, Limited 4WD, Limited HEV 4WD | 8 Cyl 5.7L
View related parts
Chrysler Crankshaft Damper
Part Number: 68147497AA
$302.17 MSRP: $457.00
You Save: $154.83 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
Fits the following Chrysler Models:
- 300 | 2013-2014 | C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, S AWD, S Luxury Series RWD, S RWD
View related parts
Chrysler Damper
Part Number: 5062472AC
$159.75 MSRP: $238.00
You Save: $78.25 (33%)
ADD TO CART
Product Specifications
- Replaces: 5062472AA, 5062472AB
Fits the following Chrysler Models:
- Pacifica | 2017-2020 | Hybrid, Hybrid FWD, Hybrid Limited FWD, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring FWD, Hybrid Touring L FWD, Hybrid Touring Plus FWD | 6 Cyl 3.6L
View related parts
Chrysler Crankshaft Damper
Part Number: 5184293AH
$274.29 MSRP: $410.00
You Save: $135.71 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaces: 5184293AG, 5184293AC
Fits the following Chrysler Models:
- 200 | 2011-2017 | C AWD, C FWD, Limited, Limited Convertible, Limited Sedan, LX, LX Sedan, S AWD, S Convertible, S FWD, S Sedan, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
- 300 | 2011-2023 | Base AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C Platinum AWD, C Platinum RWD, C RWD, Limited AWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, S V6 AWD, S V6 RWD, Touring AWD, Touring RWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
- Pacifica | 2017-2025 | Hybrid, Hybrid FWD, Hybrid Limited FWD, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring FWD, Hybrid Touring L FWD, Hybrid Touring Plus FWD, L FWD, Limited, Limited FWD, LX, LX FWD, Touring, Touring FWD, Touring L, Touring L FWD, Touring L Plus, Touring L Plus FWD, Touring Plus FWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6L
- Town & Country | 2011-2016 | Gold, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring-L | 6 Cyl 3.6L
- Voyager | 2020-2025 | L FWD, LX FWD, LXI FWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
View More
View related parts
Chrysler Crankshaft Damper
Part Number: 5184293AG
$274.29 MSRP: $410.00
You Save: $135.71 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
Fits the following Chrysler Models:
- 200 | 2013-2016 | C AWD, C FWD, Limited, Limited Convertible, Limited Sedan, LX, LX Sedan, S AWD, S Convertible, S FWD, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
- 300 | 2013-2015 | Base AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C Platinum AWD, C Platinum RWD, C RWD, Limited AWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD | 6 Cyl 3.6L
- Town & Country | 2013-2015 | Limited, Limited Platinum, LX, S, Touring, Touring L | 6 Cyl 3.6L
View More
View related parts
Chrysler Crankshaft Damper
Part Number: 5184293AC
$274.29 MSRP: $410.00
You Save: $135.71 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
Fits the following Chrysler Models:
- 200 | 2011-2012 | Limited Convertible, Limited Sedan, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan | 6 Cyl 3.6L
- 300 | 2011-2012 | Base AWD, Base RWD, Limited AWD, Limited RWD, S V6 AWD, S V6 RWD | 6 Cyl 3.6L
- Town & Country | 2011-2012 | Gold, Limited, LX, Touring, Touring L | 6 Cyl 3.6L
View More
View related parts
Chrysler Crankshaft Damper
Part Number: 4792814AB
$141.75 MSRP: $212.00
You Save: $70.25 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
Fits the following Chrysler Models:
- 300 | 2005-2010 | Base RWD, C AWD, C RWD, LX RWD, Touring RWD | 6 Cyl 2.7L
View related parts
Chrysler Crankshaft Damper
Part Number: 4792460AA
$90.19 MSRP: $114.77
You Save: $24.58 (22%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley, Vibration Damper
Fits the following Chrysler Models:
- Sebring | 2001-2006 | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Crankshaft Damper
Part Number: 4777618AG
$99.32 MSRP: $148.00
You Save: $48.68 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 4777618AI
Fits the following Chrysler Models:
- PT Cruiser | 2007-2010 | Base, Base Convertible, Classic, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler Crankshaft Damper
Part Number: 5047418AB
$185.63 MSRP: $275.00
You Save: $89.37 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley, Vibration Damper
Fits the following Chrysler Models:
- 200 | 2015-2017 | C FWD, Limited, LX, S FWD | 4 Cyl 2.4L
View related parts
Chrysler Crankshaft Damper
Part Number: 53022162AA
$627.82 MSRP: $739.00
You Save: $111.18 (16%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
Fits the following Chrysler Models:
- Aspen | 2008-2009 | Limited 2WD, Limited 4WD | 8 Cyl 4.7L
View related parts
Chrysler Crankshaft Damper
Part Number: 4777618AE
$99.32 MSRP: $148.00
You Save: $48.68 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 4777618AI
Fits the following Chrysler Models:
- PT Cruiser | 2003 | Base, GT, Limited, Touring | 4 Cyl 2.4L
View related parts
Chrysler Crankshaft Damper
Part Number: MD354781
$190.58 MSRP: $220.00
You Save: $29.42 (14%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 6 Cyl 3.0L
- Town & Country | 1999-2000 | LX FWD, LXi FWD, SX
- Voyager | 2000 | Base, SE | 6 Cyl 3.0L
View More
View related parts
Chrysler Crankshaft Damper
Part Number: 53022413AA
$239.14 MSRP: $356.00
You Save: $116.86 (33%)
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
- Replaces: 53022334AA
Fits the following Chrysler Models:
- 300 | 2011-2023 | C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C Platinum RWD, C RWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, S V8 AWD, S V8 RWD | 8 Cyl 5.7 L GAS, 8 Cyl 5.7L
View related parts
Chrysler Crankshaft Damper
Part Number: 4892096AA
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Pulley, Pulley
Fits the following Chrysler Models:
- Sebring | 2007-2010 | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Crankshaft Damper
Part Number: 4777618AD
$99.32 MSRP: $148.00
You Save: $48.68 (33%)
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 4777618AI
Fits the following Chrysler Models:
- PT Cruiser | 2002 | Base, Limited, Touring | 4 Cyl 2.4L
View related parts
Chrysler Crankshaft Damper
Part Number: 4777618AF
$99.32 MSRP: $148.00
You Save: $48.68 (33%)
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 4777618AI
Fits the following Chrysler Models:
- PT Cruiser | 2003-2006 | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L

| Page 1 of 3 |Next >

1-20 of 57 Results

Chrysler Crankshaft Pulley

Our website has a huge selection of Chrysler Crankshaft Pulleys at the optimal prices in the industry. If you need any genuine Chrysler Crankshaft Pulleys, we ship them to your door step as we offer a fast delivery service. In addition, all OEM parts are backed by the manufacturer's warranty.

Chrysler Crankshaft Pulley Parts Questions & Experts Answers

Crankshaft Damper
4892096AA
Q: How to remove and install the crankshaft pulley in 3.6L V6 engine on Chrysler Sebring?
A:
To remove the crankshaft pulley, first disconnect the negative battery cable from the remote ground terminal or battery. Loosen the lug nuts on the right front wheel, raise the vehicle, and support it securely on jackstands before removing the right front wheel. Next, remove the drivebelt. The crankshaft pulley bolt is incredibly tight; using a breaker bar, socket, and special tool #10198 or equivalent, hold the balancer to prevent it from turning while loosening and removing the bolt. Pull the crankshaft pulley off the crankshaft without needing a puller. For installation, apply clean engine oil or multi-purpose grease to the seal contact surface of the balancer hub to prevent damage to the seal lip and oil leakage. Install the crankshaft pulley, aligning the keyway on the crankshaft with the slot in the pulley hub, and install the bolt, tightening it by hand. Prevent the engine from rotating and then tighten the bolt to the specified torque. The remainder of the installation follows the reverse order of removal.